TL-WA801ND is designed to establish or expand a scalable high-speed wireless N network or to connect multiple Ethernet enabled devices such as game consoles, digital media adapters, printers, or network attached storage devices to a wireless network. The APs support a host of different functions that makes your wireless networking experience more flexible than ever before. It allows you enjoy a better Internet experience when downloading, gaming, video streaming or with any other application that you may wish to use.
Features
- 300Mbps wireless speed ideal for smooth HD video, voice streaming and online gaming
- Supports multiple operation modes: Access Point, Multi-SSID, Client, Repeater, Bridge with AP
- Easily setup a WPA encrypted secure connection at a push of the WPS button
- Up to 30 meters (100 feet) of flexible deployment with included Passive Power over Ethernet Injector
Wireless N – Speed & Range
- Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through two antennas to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not
Multiple Operating Modes – Easy to Build WLAN
- Supports multiple operation modes (Access Point, Multi-SSID, Client, Repeater, Bridge with AP) to enable various wireless applications to give users a more dynamic and comprehensive experience when using their AP. Multiple operating mode also helps you easily to build wireless network for hard-to-wire locations or eliminating wireless dead zone.
Passive PoE Supported – More Flexible Deployment
- The TL-WA801ND is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.
HARDWARE FEATURES:
Interface
- One 10/100M Ethernet Port(RJ45)
- Support Passive PoE
Button
- Power On/Off Button
- WPS Button
- Reset Button
External Power Supply
- 9VDC / 0.6A
Wireless Standards
- IEEE 802.11n
- IEEE 802.11g
- IEEE 802.11b
Dimensions ( W x D x H )
- 7.1 ×4.9× 1.4 in. (181 ×125 ×36mm)
Weight
- 210g
Antenna Type
- 2*5dBi Detachable Omni Directional (RP-SMA)
WIRELESS FEATURES:
Frequency
- 2.4-2.4835GHz
Signal Rate
- 11n: Up to 300Mbps(dynamic)
- 11g: Up to 54Mbps(dynamic)
- 11b: Up to 11Mbps(dynamic)
Reception Sensitivity
- 270M: -68dBm@10% PER
- 130M: -68dBm@10% PER
- 108M: -68dBm@10% PER
- 54M: -68dBm@10% PER
- 11M: -85dBm@8% PER
- 6M: -88dBm@10% PER
- 1M: -90dBm@8% PER
Transmit Power
- Less than 20dBm(EIRP)
Wireless Modes
- AP Mode
- Multi-SSID Mode
- Client Mode
- Repeater Mode
- Bridge with AP Mode
Wireless Functions
- Enable/Disable Wireless Radio
- MAC Address Filter
Wireless Security
- 64/128/152-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK
Quality of Service
- WMM
Management
- SNMP
Advanced Functions
- Up to 30 meters Passive PoE is supported
OTHERS:
Certification
- CE
- FCC
- RoHS
System Requirements
- Microsoft Windows 98SE
- NT
- 2000
- XP
- Vista™ or Windows 7, 10
- MAC OS
- NetWare
- UNIX or Linux.
Environment
- Operating Temperature: 0℃~40℃ (32℉~104℉)
- Storage Temperature: -40℃~70℃ (-40℉~158℉)
- Operating Humidity: 10%~90% non-condensing
- Storage Humidity: 5%~90% non-condensing
