Overview
- The TP-Link LiteWave Series PoE Switches require no configuration and provide PoE (Power over Ethernet) ports. They can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.
Technical Specifications
Standards
- IEEE802.3i, IEEE802.3u,IEEE802.3x,IEEE802.3af, IEEE802.3at
Interface
- 9 10/100 Mbps RJ45 Ports
Network Media (Cable)
- 10BASE-T: UTP category 3, 4, 5 cable (maximum 100 m); EIA/TIA-568 100Ω STP (maximum 100 m)
- 100BASE-TX: UTP category 5, 5e cable (maximum 100 m); EIA/TIA-568 100Ω STP (maximum 100 m)
PoE
PoE Standard
- PoE Standard: IEEE 802.3af, IEEE 802.3at
PoE Port
- Port 1–8, up to 30 W per port
PoE Power Budget
- 63 W
Auto Negotiation
- Yes
Auto MDI/MDIX
- Yes
Max Power Consumption
- 3.67 W (220 V/50 Hz no PDconnected)
- 73.24 W (220 V/50 Hz with 63 W PD connected)
Max Heat Dissipation
- 12.48 BTU/h (220 V/50 Hz no PD connected)
- 249 BTU/h (220 V/50 Hz with 63 W PD connected)
Forwarding Mode
- Store and Forward
Switch Capacity
- 1.8 Gbps
MAC Address Table
- 2k, Auto-learning, Auto-aging
Extend Mode
- YES (Ports 1-4/Ports 1-8)
Solation Mode
- YES (Ports 1-8)
PoE Auto Recover
- YES (Ports 1-8)
Flow Control
- Yes
Fan Quantity
- 0
LED
- Power, Link/Act, PoE Status, PoE MAX
Dimensions
- 6.7X3.9X1.1 in.(171 x 98 x 27 mm)
Certifications
- CE, FCC, RoHS
