Features
Green Technology
• Link status detection
• Port shut-off
• System hibernation
• Time-based PoE (PoE models only)
Security Features
• Access Control Lists (ACLs)
• D-Link Safeguard Engine protects the CPU from broadcast/multicast/unicast flooding
• Port Security supports up to 64 MAC addresses per port
• ARP Spoofing Prevention
• Smart Binding
Intuitive Management
• D-Link Network Assistant (DNA) utility or multilingual Web UI
• Built-in SNMP MIB for remote NMS (D-View 7.0)
• Compact Command Line Interface (CLI) through Telnet
Advanced Features
• Static route
• Surveillance Mode
• Auto Voice VLAN
• Dual software images
• Dual configuration files
The D-Link DGS-1210 Series Smart Managed Switches are the latest generation of switches to provide increased Power over Ethernet (PoE) output, a range of physical interface types, multiple management interfaces, and advanced Layer 2 features. With all of these features combined, the DGS-1210 Series provides a cost-efficient and flexible solution for expanding any business network.
Seamless Integration
The DGS-1210 Series includes a wide range of port and media types, including 10/100/1000BASE-T RJ-45 ports, 100/1000 Mbps combo ports, and 100/1000 Mbps SFP ports. The DGS-1210-10, DGS-1210-26, DGS-1210-10P, and DGS 1210-10MP models feature 2 100/1000 Mbps SFP ports, while all other DGS 1210 Series models feature 4 100/1000 Mbps combo ports, allowing you to choose the most suitable media type for your requirements. All DGS-1210 Series PoE switches include support for IEEE 802.3af/at and higher power budgets, allowing more PoE devices to be powered by the switch and for devices to be installed in remote locations without immediate access to power outlets.
Advanced Features
The DGS-1210 Series comes equipped with a complete lineup of L2 features, including IGMP snooping, port mirroring, Spanning Tree Protocol (STP), and Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfers. The DGS-1210 Series also supports advanced features such as static routes, which allow network administrators to divide the network into VLANs, increasing
network efficiency. Network maintenance features include loopback detection and cable diagnostics. Loopback detection significantly speeds up troubleshooting by automatically detecting and shutting down switching loops. The cable diagnostics feature, designed primarily for administrators and customer service representatives, determines the cable quality and quickly discovers errors, allowing for hassle-free diagnostics and maintenance.
Automatic Configuration
The DGS-1210 Series supports Auto Voice VLAN and Surveillance Mode, which allow voice and video traffic to be automatically identified and handled differently to regular network traffic. Auto Voice VLAN detects Voice over IP (VoIP) traffic and automatically segments it from the rest of the network, increasing security and allowing Quality of Service (QoS) to be applied. Surveillance Mode detects compatible ONVIF cameras and places them in a surveillance VLAN, allowing a single switch to be used for voice, video, and data, removing the need for dedicated hardware and reducing maintenance costs. Surveillance Mode also includes its own Web UI, making surveillance features easily accessible and simplifying management of your surveillance network.
Secure Your Network
D-Link’s innovative Safeguard Engine protects the switches against traffic flooding caused by malicious attacks. The DGS-1210 Series supports 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. The Access Control List (ACL) feature enhances network security and helps to protect the internal IT network. The DGS-1210 Series also features Address Resolution Protocol (ARP) spoofing prevention, which provides protection from attacks on the network that could allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages. To prevent ARP spoofing attacks, the switch uses packet control ACLs to block invalid packets that contain fakeARP messages. For added security, the DHCP server screening feature filters DHCP replies on unauthorized ports to prevent them from being assigned an IP address.
Versatile Management
The DGS-1210 Series comes with the D-Link Network Assistant (DNA) utility that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant utility furthermore allows customers to easily discover multiple D-Link Smart Managed Switches within the same L2 network segment and display them on-screen for instant access. With this utility, users do not need to change the IP address of their PC. This allows for simultaneous configuration and basic setup of all discovered devices, including password changes and firmware upgrades. The DGS-1210 Series also supports D-View 7.0 and Command Line Interface (CLI) through Telnet. D-View 7.0 is a network management system that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security.
Technical Specifications
1000Base-T PoE Interface
- 48 port
1000M SFP Interface
- 4 port
Auto MDI/MDIX
- Yes
10/100/1000BASE-T PoE ports
- 48 port
SFP ports
- 4 port
Switch Capacity
- 104 Gbps
Max. Packet Forwarding Rate
- 77.4 Mpps
Store & Forwarding Forwading
- Yes
Dimension
- 440mm x 430 mm x 44mm
Weight
- 6.52 kg
Operation Temperature
- -5 – 50°C
Storage Temperature
- -20-70°C
Operating Altitude
- 1500 meters
Maximum Power Consumption
- 967.5 W (PoE on) <br> 53.1 W (PoE off)
Standby Power Consumption
- 34.8W/100V / 33.1 W/240V
Storage Humidity
- 0% ~ 95% RH
Operation Humidity
- 0% – 95% RH
Maximum Heat Dissipation
- 3,301.08 BTU/hr
MTBF
- 350,728 hours
Power Input
- 100-240 VAC
CPU Speed
- 400MHz
DRAM Size
- 256MB
Flash Memory Size
- 32MB
Packet Buffer Size
- 3.0MB
FAN
- Yes
Comply with RoHS 6
- Yes
Power Saving By Link Status
- Yes
Power Saving By LED Shut-Off
- Yes
Power Saving By Port Shut-Off
- Yes
Power Saving By System Hibernation
- Yes
Time-based PoE
- Yes
Maximum PoE Budge
- 740 Watt
PoE Budget
- 740 Watt
MAC Address Table Size
- 16K
802.3x Flow Control
- Yes
Head-of-line (HOL) Blocking Prevention
- Yes
802.1D Spanning Tree (STP)
- Yes
802.1w Rapid Spanning Tree (RSTP)
- Yes
802.1s Multiple Spanning Tree (MSTP)
- Yes
Root Restriction
- Yes
802.3ad Link Aggregation
- Yes
Link Aggregation Group Per Device
- 26
Max Port Per Link Aggregation Group
- 8
IGMP Snooping
- Yes
Max IGMP Snooping Groups
- 256
IGMP Snooping Fast Leave
- Yes
MLD Snooping
- Yes
MLD Snooping Groups
- Yes
MLD Snooping Fast Leave
- Yes
Jumbo Frame
- 9,216 Bytes
Loopback Detection (LBD)
- Yes
Port Mirroring
- Yes
802.1Q VLAN
- Yes
VLAN Groups
- Yes
Port-based VLAN
- Yes
Voice VLAN
- Yes
Auto Surveillance VLAN
- Yes
Asymmetric VLAN
- Yes
IPv6 Neighbor Discovery (ND)
- Yes
ND Entries
- 512
Static Route
Number of Queue
Class of Service (CoS)
Weighted Round Robin (WRR)
Strict Priority Queue (SPQ)
Max Access Control List (ACL) Entries
MAC Access List
IP Access List
IPv6 Access List
Port-based Bandwidth Control
SSH
SSL
Port Security
Broadcast/Multicast/Unicast Storm Control
Traffic Segmentation
Smart IP-MAC-Port Binding (Smart IMPB)
D-Link Safeguard Engine
DHCP Server Screening
ARP Spoofing Prevention
DoS Attack Prevention
802.1X
Port based 802.1X Authentication
Authentication for Management Access
RADIUS
Trusted Host
Cable Diagnostics
Simple Network Time Protocol (SNTP)
Web-based GUI
Telnet Server
SNMP
SNMP Trap
TFTP Client
RMONv1
LLDP
LLDP-MED
D-Link Discover Protocol (DDP)
DHCP/BootP Client
DHCP relay
Dual Images
Debug Command
- Yes
